Al-Ko DRAIN 8500 EASY Submersible Water Pump 0.3kW (113962)

Combined pump underwater pump Drain 9500 Easy for clean and dirty water
Thanks to the combined pump base (adjustable pump foot), the Drain 9500 Easy is suitable for both clean and dirty water. Dirty water function is used when pumping contaminated water, eg. B. After flooding, from dirty ponds or when the tanks are expected. Thanks to the large inlet opening, the Drain 9500 Easy model can effortlessly deal with dirty water up to 25 mm in size.
Adjustable switching height with 2 position bracket
The float switch can be set in two positions for continuous, monitored or automatic. In automatic mode, the pump automatically shuts down after reaching the minimum water level.
Thanks to the practical integrated transmission handle and small weight, only about 4 kg, the submersible pump can be used for both movable and stationary drainage. With 300 W power, feed height up to 6 m and feed speed up to 8500 l/h, pumping and pumping is done in the shortest possible time. In the large pump leg, the integrated pump output provides the best performance. Flexible thanks to the screwed combined connector on the pump output. The pump output is 1.25 inches, which is approximately 41.9 mm.
The specially processed motor shaft made of durable stainless steel, and the glass fiber -reinforced polypropylene body provides a long service life for this practical assistant.
Note: The submersible pump is not suitable for drinking water, but only for technological water and chlorinated water (swimming pool water) with a temperature below 35 ° C. It is also not suitable for use in salt water, in water with aggressive chemicals or in water containing sand.