Blum Space-Step Cross Profile 1040mm, Grey (Z95Q1040A)

• Cross member for SPACE STEP.
• For shortening - blank = LW - 130mm
• Recommendation: KB 1200 mm, use 2 pieces to prevent too strong deformation.

Maximum load: 150 kg. Approval of the actual load capacity of the furniture you manufacture with SPACE STEP must be provided by the manufacturer in accordance with EN-14183. This fact must be stated on the manufacturer's label.

Recommended material: We recommend a coated board (3 layers) with a minimum thickness of at least 21 mm for the plinth step.

Recommendation of the step surface: For this purpose, it is possible to use a non-slip mat, which will be directly connected to the surface of the step, or a non-slip plate. STEP: Only 30 kg or 40 kg lines may be used. Dynamic load capacity for extension under SPACE STEP is 20 kg