Poliuretāna Akrila Krāsa Caparol Capacryl PU-Gloss T

High-grade intermediate and finishing coats on primed, dimensionally stable wood component parts, primed metals and unplastizised/rigid PVC, in the exteriors and interiors. Do not use white tints on heating systems to avoid yellowing (apply Capacryl Heizkörperlack).

• Material Properties
  
• Low odour.
• Elegant and easy application.
• Non-blocking.
• High scratch resistance and shock strength.
• Diffusion-capable.
• Resistant to normal household cleaners.
• Wet scrub resistance class to DIN EN 13 300: Class 1 (corresponds to scrub-resistant according to DIN 53778).
• Suitable for children toys according to DIN EN 71-3.
• Resistant to disinfectants.

Suitable Substrates
Primed, dimensionally stable wood component parts, primed metals and unplastizised/rigid PVC.
The substrate must be clean, sound/stable, dry and free from substances that may prevent good adhesion. Maximum permissible moisture/humidity content in dimensionally stable wood: 13%.

Method of Application
Capacryl PU-Gloss/PU-Satin can be applied by brush, roller or spraying equipment. Stir well before use and dilute, if necessary, with max. 5 - 15 % of tap (potable) water for intermediate coat.
For brush application use Orelmix brushes.

Manual application on large surfaces: Apply with a textured, short pile polyamide (nylon) roller and treat immediately with a fine-porous foam roller or Orelmix brush.

For a fast application and an even surface treatment the tool sizes should be adjusted to the surface area.