Akrila Bāzes Lazūra Kokam Caparol Capadur Greywood

Selected noble shades of grey give, from the very beginning, the impression of a naturally and evenly greyed surface, as otherwise may be generated in the nature only after many years in favourable climatic conditions.
Preferred fields of application are wooden facades, which are intended to show a natural appearance. Capadur GreyWood is also suitable for fences, balcony balustrades, window shutters, gates and other wooden parts of unstable shape or with limited stability, but also for dimensionally stable construction elements like windows and outer doors.
Only for exterior use! (The interior surfaces of outer windows and doors belong to the exterior surfaces.) Capadur GreyWood is provided with a preservative against deterioration in the coating film due to algal and fungal attack (fungi/mildew/mould growth). The film preserving agent delays infestation.
Depending on biological exposure/contamination, on extremely stressed wooden parts, e.g. in the area of flat roof soffits or on board-shaped wood derivatives (e.g. boards of maritime-pine), the attack may occur again, even before normal warranty time limit has ended. Do not apply on wood with permanent contact to the ground and moisture/water.

Material Properties

• Noble shades of grey due to pearlescent pigments.
• Excellent protection against UV rays due to reflecting pigments.
• Provided with a film preservative against fungal attack (fungi/mildew/mould).
• Thin-bodied (low film-building) wood stain, allows better renovation.
• Water-dilutable.
• Non-blocking.
• Conform with VOC Decopaint Directive (2010).
• Non-dripping consistency.

Suitable Substrates
Substrates must be clean, sound/stable, and free from all substances that may prevent good adhesion. Max. permissible moisture content in dimensionally stable wood: 13%; in limited stable wood and parts of unstable shape: 15%.
The principles of constructional wood preservation are to be observed. They are the basis for a durable wood protection with coating materials. Please follow BFS Data Sheet No. 18, section 2.2.3 et seq., before applying on board-shaped wood-based material, e.g. solid wood, veneered plywood, particle boards or wood fibreboards.