Līmēšanas Java Klinkera Apdares Plāksņu un Keramikas Ašuvumiem Caparol Capatect Keramikkleber 084 25kg (830773)

Field of Application
Thin-bed adhesive for laying split clinkers, facing bricks, ceramic tiles and slabs in the Capatect façade systems. Bonding of ceramic tiles and slabs on other suitable, load-bearing, mineral substrates.

Material Properties

• C2 TE S1 according to DIN EN 12004
• Water-repellent
• Water vapour permeable
• High adhesive strength
• Specially suitable for use in external thermal insulation composite systems
• Malleable cementitious mortar for increased requirements

Storage
Cool, dry and frost-free
Protect from direct sunlight. Shelf life of the tightly closed original packaging: min. 12 months.

Substrate Preparation
All substrates must be load-bearing, even, clean, dry and free from adhesion-reducing substances. The laying substrate must be level and plumb according to DIN 18202.
When using ceramic claddings with a side length ≥ 49 cm, the evenness of the surface of the hardened base coat must not exceed a pitch of 2 mm, related to the maximum edge length of the cladding to be applied.

Method of Application
Adhere ceramic cladding according to the combined method according to DIN EN 12004 (floating-buttering method). Apply the thin-bed adhesive to the substrate with a toothed trowel (toothing according to the substrate condition, the tile size and the condition of the tile back). In addition, apply the thin-bed adhesive in an evenly thin layer to the back of the cladding.

Only apply as much adhesive as can be laid with cladding before the skin forms. Press the ceramic cladding into the wet mortar bed with a light pushing movement.

Ceramic: 8 mm teeth
Split clinker: 10 mm teeth
Clinker brick slips: 10 mm teeth
The joints between the tiles or slabs are to be made with sufficient width depending on the format. As a rule, the joints are sm