Armēšanas Līmēšanas Java Siltumizolācijas Lokšņem Caparol Capatect Klebe- und Armierungsmasse 170 25kg (838980)

Field of Application
Adhesive and base coat in the Capatect façade systems with render and especially suitable for the systems with claddings "Capatect Keramik", fine stone and natural stone.

Material Properties
Medium-layer base coat (4 - 7 mm for single-layer, max. 10 mm for double-layer application).

One material for insulation board bonding and base coat
General purpose rendering mortar according to DIN EN 998-1
Water-repellent, weather-resistant, highly permeable to water vapour

Easy processing
Good adhesion to all mineral substrates, to polystyrene and mineral wool insulation boards

Material Base / Vehicle
Mineral binders according to DIN EN 197-1 and DIN EN 459-1, synthetic resin dispersion powder.

Storage
Cool, dry and frost-free.
Original closed bags are shelf stable for approx. 12 months, low chromate for 12 months.

Resistance-count for diffusion µ (H2O)
≤ 25 according to DIN EN 998-1

Diffusion-equivalent air layer thickness sdH2O
(4 mm): sd: < 0,1 m according to DIN EN ISO 7783

Compressive strength
Class CS III according to DIN EN 998-1

Apparent density of green mortar
approx. 1,4 g/cm³ according DIN EN 998-1

Adesive tensile strength
> 0,08 N/mm2 according to DIN EN 998-1

Fire behaviour
Class A2-s1, d0 according to DIN EN 13501-1
Adesive tensile strength on EPS high-density foam board
≥ 0,08 N/mm2

Capillary water absorption
C ≤ 0,20 kg/(m2·min0,5) according to DIN EN 1015-18
Class Wc2 according to DIN EN 998-1

Water permeability (w-value)
w ≤ 0,15 kg/(m2 · h0,5) according to DIN EN 1062-3

Substrate Preparation
General notes:
The substrate must be even, clean, dry, solid, load-bearing and free of separating or adhesion-reducing residues or substances. Contamination and substances with a separating effect (e.g. formwork oil) as well as protruding mortar burrs must be removed.

Damaged, flaking old coats of paint and textured renders must be removed as far as possible. Hollow areas of the render are to be knocked off and flush with the surface to be rendered. Highly absorbent, sanding or chalking surfaces must be thoroughly cleaned to solid substance and primed with a suitable primer, e.g. "Sylitol® RapidGrund 111".

Mask off window sills and add-on parts. Carefully cover glass, ceramics, clinker, natural stone, painted and anodised surfaces. The compatibility of any existing coatings with the adhesive or base coat must be checked by an expert.

Preparation of Material
"Capatect Klebe- und Armierungsmasse 170" can be mixed to a lump-free mass using a powerful, slow-running agitator or compulsory mixer and clean, cold water. Do not use water to make material that has already stiffened workable again.

Water requirement approx. 5.8 l per 25 kg bag.