Divkomponenšu Blīvējošā Un Līmējošā Masa Caparol Capatect-Klebe-und Dichtungsmasse 114 30kg (823790)

Field of Application
Flexible, solvent-free, 2-component bitumen adhesive for bonding Capatect perimeter insulation boards made of polystyrene and XPS rigid foam to bituminous waterproofing and to other load-bearing waterproofing in the subsoil area.

Also suitable for vertical surface waterproofing of building component surfaces in contact with the ground as a bitumen thick coating according to DIN 18533.

Material Properties

• Stable, trowelable consistency
• Flexible after curing and drying
• High initial adhesion and smooth application
• Functional even under exposure to moisture
• Resistant to ageing and rotting
• Solvent-free
• Packaging/Package Size
• 30 kg combi-packaging
• Liquid component A: 22 kg (bitumen emulsion)
• Powder component B: 8 kg (hydraulic binder)

Substrate Preparation
The substrate must be even, clean, solid, load-bearing and free from separating substances.
It must be matt damp, but not wet.
Protruding concrete or mortar burrs, contamination by soil, old non-load-bearing bitumen sealants or similar must be removed. Chamfer or break corners and edges. Close cavities > 5 mm with suitable mineral mortars.

Open joints of 2-5 mm must be closed by scratch filling with "Capatect Klebe- und Dichtungsmasse 114" or suitable mortars.

In case of slightly absorbent substrates, apply "Capatect Klebe- und Dichtungsmasse 114" as scratch filler to avoid blisters. Prime absorbent mineral substrates with "Capatect Klebe- und Dichtmasse 114" (diluted 1:1 with water).