Armēšanas Līmēšanas Java Caparol Capatect-SockelFlex Siltumizolācijas Lokšņem, Mitruma Aizsargājoša 18kg (961650)

Organic component for reinforcing and waterproofing of ETICS✱ in plinth area as well as for bonding thermal insulation boards; to be mixed with cement

Adhesive and reinforcement compound for bonding, reinforcing and waterproofing of thermal insulation boards in plinth area within Capatect ETICS✱ systems A and B.

✱ ETICS = External Thermal Insulation Composite System
Brit. term: EWI = External Wall Insulation
Am. term: EIFS = External Insulation and Finish System

• Material Properties
  
• Synthetic resin filling compound, to be mixed with cement
• Multi-purpose use
• High adhesive strength
• Adhesive on bituminous substrates
• Paste-like
• Impermeable to water
• Water vapour permeable
• Frost resistant
• Good fresh mortar stability

Suitable Substrates
Masonry and concrete with or without sound, clean and load-bearing plaster / paint

Substrate Preparation
Substances and impurities that may prevent good adhesion must be removed, such as form oil.
Sharp mortar burrs, cavities, unsound parts and flaking paints respectively plaster coatings are to be removed. Repair to match the surrounding surface if necessary.
Highly absorbent, sanding or chalking surfaces should be cleaned thoroughly up to the solid substance and prime with Sylitol Concentrate 111.

Preparation of Material
Mix the pasty compound in 1:1 ratio with cement CEM I 32.5 just before use.
Stirr up with a suitable low-speed electric paddle until the mixture is free of lumps. Adjust to working consistency by adding approx. 5% of tap water, when used for sealing coat.

Never mix slightly hardened or stiff material with water (such a material is unusable).