Armēšanas Līmēšanas Java Caparol Capatect X-TRA 300 Mehāniskās Izturības Virsmu Izveidei 25kg (916285)

Impact-resistant, low dusting adhesive and base coat for Capatect façade systems with EPS, MW and PUR insulation materials. Can be used in layer thicknesses of 4-20 mm depending on the insulation material and system used.

Material Properties

• Carbon fibre reinforced
• Increased algae and fungus protection and better sound insulation with thick-layer construction
• Low dusting for increased health protection
• Highly water vapour permeable, water repellent
• Excellent workability, high adhesive strength
• Can be used on old, cracked mineral and load-bearing substrates

Storage
Cool, dry and frost-free. Protect from direct sunlight.
Shelf life of originally closed containers is approx. 12 months.

Technical Data
Normal render mortar according to DIN EN 998-1
Dusting behaviour: Low dusting (SA) according to DIN EN 15051-3

Substrate Preparation
Mask off window sills and add-on parts. Carefully cover glass, ceramics, clinker, natural stone, painted, glazed and anodised surfaces.

The substrate must be solid, dry, free of grease and dust and, if necessary, have sufficient load-bearing capacity for the use of dowels. Remove impurities and substances with a separating effect (e.g. formwork oil) as well as protruding mortar burrs. Damaged, peeling paints and textured plasters must be removed as far as possible. Hollow areas of plaster are to be knocked off and flush with the surface. Highly absorbent, sanding or chalking surfaces must be thoroughly cleaned down to the solid substance and primed. The compatibility of any existing coatings with the adhesive mortar must be checked by an expert.

Preparation of Material
Capatect X-TRA 300 can be processed with all common continuous mixers, screw feed pumps and rendering machines, but can also be mixed manually with a powerful, slow-running agitator using clean, cold water to form a lump-free mass. Allow to mature for approx. 3-5 minutes and stir again briefly. If necessary, adjust the consistency with a little water after this maturing time.

Mixing: 25 kg material (one bag) in approx. 9-10 l water.
Do not use water to make material that has already set workable again.