prof.logo

Armēšanas Līmēšanas Java Caparol CarbonSpachtel X-TRA 900 Ar Vieglajām Organiskām Pildvielām 15kg (979382)

SKU
509482
Ean
4002382050402
€3,95/kg
Special Price €59,18 /pcs was €78,12
In stockIn supplier's warehouse
Armēšanas Līmēšanas Java Caparol CarbonSpachtel X-TRA 900 Ar Vieglajām Organiskām Pildvielām 15kg (979382)
€59,18
Shipping methods:
Self-pickup - Uriekstes 4a | FREE
Receive from 4. till 6. October
Self-pickup | Not available
Delivery by courier | from €10.99
Receive from 6. till 9. October
Delivery by courier | From 10kgDelivery by courier | Not available
CONVENIENT SHOPPING
CONVENIENT SHOPPING
70.000+ PRODUCTS
100.000+
PRODUCTS
DELIVERY ALL OVER LATVIA
DELIVERY ALL OVER LATVIA
CLIENT SUPPORT
CLIENT SUPPORT

More Information

Weight (kg)
15kg
Type
Līmēšanas + armēšanas java
Consumption kg/m2
1.0 kg/mm/m2
Blocks palette
24
Manufacturer
Caparol
Svītrkods
4002382050402

Details

Ready-to-use carbon fiber reinforced adhesive and base coat with organic lightweight aggregates (EPS)

Very economical light-filler base coat for EPS and mineral wool insulation boards in the Capatect facade systems as well as for bonding EPS insulation boards. The Capatect CarbonSpachtel X-TRA 900 can also be used in the renovation of load-bearing substrates and EPS insulation boards.

Material Properties

  • Carbon fiber reinforced
  • Highly impact- and crack-resistant
  • Low material consumption
  • Very economical
  • High stability
  • Very easy processing

To avoid overlapping, apply wet-on-wet in one go. In order to maintain the special properties, Capatect Carbon products must not be mixed with other products. Not suitable on horizontal surfaces exposed to water.

Substrate Preparation
Masonry, concrete or firmly adhering paint must be clean, dry and stable. Impurities and separating substances (e.g. formwork oil) as well as protruding mortar ridges must be removed. Damaged, peeling old paintwork and finishing coats should be removed as far as possible.

Any existing offsets on the board joints of Capatect EPS facade insulation boards must be sanded off beforehand and any sanding dust must be removed. Mask off window sills and other attachments.

Preparation of Material
Capatect CarbonSpachtel X-TRA 900 is ready to use. The material must be stirred briefly before processing. In warm weather, it is possible to regulate the consistency by adding a little water.

Method of Application
Bonding the EPS insulation boards:
Apply the adhesive mortar to the entire backside of the boards using the tooth bed method. The adhesive mortar can also be applied over the entire surface of the substrate. The adhesive mortar must be combed with a notched trowel immediately before the insulation panels are attached. Immediately, after 10 minutes at the latest, the insulation boards must be correctly pressed into the fresh adhesive mortar bed.

Reviews

Write a review for: Armēšanas Līmēšanas Java Caparol CarbonSpachtel X-TRA 900 Ar Vieglajām Organiskām Pildvielām 15kg (979382)