Armēšanas Līmēšanas Java Caparol CT CS Klebe-und Armierungsmörtel 850 Siltumizolācijas Plāksnēm 25kg (733597)

Field of Application
Factory dry mortar to be used as adhesive and base coat for "Capatect CS-Dämmplatte 045 Mineral 800". Use in combination with "Capatect CS-Strukturputz 860". Also to be used as lightweight base coat for "Capatect PF-Dämmplatte 122".

Material Properties

• Low material consumption.
• Easy to apply due to light aggregates.
• Weather-resistant.
• Highly water vapour permeable.
• Excellent adhesion.
• High adhesive power on nearly all types of substrates.
• Elastic due to fibre-reinforcement.

Colours
Off white

Storage
Cool and dry, but frost-free. Protect from direct sunlight.
Completely empty containers and silos before longer downtimes (winter break).
Shelf life of the original, tightly closed bag: approx. 12 months.

Substrate Preparation
Mask off window sills and add-on parts. Carefully cover glass, ceramics, clinker, natural stone, painted, glazed and anodised surfaces. Masonry, concrete or firmly adhering coatings must be clean, dry and load-bearing. Remove impurities and separating substances (e.g. formwork oil) as well as protruding mortar burrs. Damaged, peeling old coats of paint and textured plaster must be removed as far as possible. Hollow areas of plaster are to be knocked off and flush with the surface.

Highly absorbent, sanding or chalking surfaces must be thoroughly cleaned to solid substance and primed with "Sylitol® RapidGrund 111".

Preparation of Material
Add the contents of a 25 kg bag of Capatect 850 gradually into 9 - 10 l of tap (potable) water and mix carefully with a low-speed electrical paddle (agitator) until the mixture is free of lumps.
Do not prepare more mortar than can be processed within two hours. Already hardened material can not be made applicable by adding water.