Gatavais Siloksānu Tonējamais Fasādes Apmetums Caparol CT FassadenPutz K15 Transp Base 3 (Biezpiens) 25kg (844958)

Ready-to-use, structurable, organically bound plaster for mineral and organic wall and ceiling surfaces outdoors. Can be used as finishing coat in conjunction with the Capatect facade systems.

Material Properties

• highly water vapour permeable
• weatherproof
• water-repellent
• water-thinnable
• smooth processing
• without biocides as coating protection

Substrate Preparation
The substrate must be even, clean, dry, solid, sound/ stable and free from all substances that may prevent good adhesion. In Germany follow VOB, part C, DIN 18 363, section 3.

Remove unsound coatings of enamel, emulsion paint, synthetic (organic) render/ plaster and unsound mineral paint coatings completely. Clean adherent paint coatings dry or wet.

Clean surfaces infested with organic growth (fungi/ mildew/ mould, moss, algae attack) with a highpressure water jet, in compliance with the regulations. Then use Capatox and allow to dry thoroughly. Clean surfaces contaminated with industrial pollution (factory fumes) or soot by high-pressure cleaner and suitable cleaning agent, in compliance with the regulations.

With grain sizes < 2.0 mm an additional pre-treatment of the base coat may be necessary.

Method of Application
Apply the textured plaster with stainless steel trowel or suitable spraying equipment homogeneously to the complete surface and immediately rub down to the grain size. Directly after that treat the K-type renders evenly with a plastic trowel or PU-board, by circularly ´ironing´, and texture the R-type materials horizontally, vertically or circularly, as desired. The surface roughness profile is influenced by the chosen tool, hence always the same type of texturing tool should be used.

For spray application the nozzle size depends on particle sizes (nozzle size = particle size x 4). Working pressure: 0.3 to 0.4 MPa (3 to 4 bar). Apply thoroughly an even layer during spray application and avoid overlapping that may be caused by storeys of scaffolding.

To achieve an even texture always the same craftsmen should work on a surface. To avoid lapping on large area surfaces, care should be taken to have a sufficient number of hands/craftsmen on the job and to apply the material wet-on-wet without interruption

Being natural products, the granular materials used in the plaster, may occasionally cause slight colour variation in the finished coating. Use only material marked with identical batch numbers or, if utilising material from different batches, mix the entire quantity needed in advance.
Capatect facade plasters are not suitable for horizontal surfaces exposed to water.