Krāsa Caparol Metallocryl Interior Ar Metāliskiem Pigmentiem

Capadecor Metallocryl Interior is a glossy emulsion paint with special metallic pigments for use on interior wall surfaces. Particularly suitable for application on representative wall surfaces, e.g. shopping centres, office buildings, banks, insurance companies, railway stations, discotheques, etc.

Material Properties

• Emission-minimised, solvent-free.
• Meets the requirements of AgBB (Commission for the sanitary evaluation of building material).
• Pronounced (strong) metallic effect.
• Wet scrub resistance class 1 according to DIN EN 13300.
• Fire protection classification according to German standard DIN 4102: A2 "nicht brennbar" (non-combustible).
• Resistant to aqueous disinfectants.

Material Base / Vehicle
Synthetic resin dispersion/emulsion according to German standard DIN 55945.

Suitable Substrates
The substrate must be sound/stable, dry, clean, and free from all substances that may prevent good adhesion. Follow VOB, part C, DIN 18363, section 3.

Substrate Preparation
The way of substrate preparation depends on present substrates and their condition. Follow Technical Information Amphibolin for covering surfaces with Metallocryl Interior.

Method of Application
The product should be stirred thoroughly before and during application at regular intervals.

Apply with paint brush or roller. Areas of trimming should be rolled again. For roller application a medium pile roller should be used (pile height 12-16 mm), that prevents accumulation of paint on the margins.

In order to ensure a uniform orientation of effect pigmentation (aluminium mica), apply the product evenly, spread crosswise and then roll in one direction.
On even (smooth/untextured) surfaces a uniform metallic effect coating of Metallocryl Interior cannot be effected without leaving noticeable brush or roller marks.

Highly appealing surfaces are achievable on smooth/even substrates, when Capadecor Metallocryl Interior is evenly roller applied and then directly treated (crosswise) with an oval brush or using the special ArteTwin trowel. Spray application may lead to a clouding effect (blushing) and uneven gloss level due to spray mist, and is therefore not suggested.

Capadecor Metallocryl Interior can be used on textured surfaces with a grain size of approx. 2 mm or more, without further treatment via brush or trowel.
Smooth/even, fine-textured substrates and surfaces with adverse lighting conditions (grazing light) cannot be coated without leaving noticeable roller marks or a slightly "cloudy" appearance (blushing).

Additional appealing effects are achievable, when Capadecor Metallocryl Interior is used as intermediate coat before applying Capadecor ArteLasur or ArteLasur Color.