Cementa mūrjava un apmešanas java Sakret ZM M-10 Big Bag 1000kg

Sakret ZM M-10 cement-based masonry and plastering mortar - For exterior and interior work, for masonry, plastering, and repair work. Suitable for all types of wall construction with bricks or blocks (according to EN 998-2 standard, strength class M 10). Also suitable for multiple-layer plastering (according to EN 998-1 standard, mortar class CS IV). Excellent mechanical and climatic resistance. High hydrophobicity and water vapor permeability. Can be applied by hand or with a mixer. Particle size up to 2mm.

Consumption: 16.6 kg/m² (for a layer thickness of 10mm)

Application

• The base must be dry and solid, all cracks and voids must be filled
• Bricks or blocks must be clean and dry
• Clean the base from less durable and/or detachable layers
• Scrape particularly dense and/or smooth bases
• Prime highly absorbent surfaces with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)
• Prime particularly smooth concrete surfaces with SAKRET QG primer
• Mix SAKRET ZM in a clean container with cold water until a homogeneous mass without lumps is formed
• It is recommended to use a mixer with 600 revolutions per minute
• After the initial setting time (~3 minutes), mix again
• Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperature increases, higher temperature decreases the specified values
• Protect the mortar from sunlight, drafts, and excessively high temperatures (>30°C) during the hardening phase
• Protect fresh mortar from rain and excessively rapid drying
• Once the mortar has started to set, do not add water anymore!
• Immediately after preparing the mortar, rinse the containers and tools with water
• Hardened mortar can only be removed mechanically
• Contains cement, reacts alkaline
• Protect skin and eyes, follow the technical instructions. If the mortar gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
• Protect the packaging from the influence of weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging

Technical data