DAB vs Circulation Pump 55W (60115298/60182215H)

CIRCULATION PUMP WITH WET ROTOR Purpose. Designed for hot water systems with a circulation line. Operating range. Capacity: from 0.6 to 3.7 cubic meters/h, pressure: up to 6 m water column. Maximum operating pressure: 10 bar. Pumped fluid. Composition: clean, without solid impurities and mineral oils, non-viscous, chemically neutral, similar in properties to water. Temperature: for sanitary water from +5°C to +85°C, for other uses from -10°C to +110°C. Main materials. Hydraulic body - bronze, impeller - technopolymer, rotor - ceramic, seal - EPDM. Features. The motor is lubricated with the pumped fluid. The motor does not require additional overload protection. Installation. The motor shaft is strictly horizontal. Standard power supply: 1x230 V. Protection class: IP 44. Insulation class: F.

The DAB VS 35/150 pump is a circulation type device, manufactured in Europe. Designed for installation in hot water circulation systems. The pump can also be used in heating systems and underfloor heating.

The device body is made of bronze to protect against corrosion, as high temperature and oxygen in hot water actively promote rust formation and metal degradation, causing constant component replacement.

The DAB VS pump series is characterized by only one motor speed, which is set taking into account the specific conditions of the thermal circuit to ensure the necessary hydraulic parameters.

The device operates quietly, thanks to the new housing that protects the rotor. Easy to install and does not require periodic maintenance (part replacement, bearing lubrication, etc.). VS models have an air release valve located at the front of the pump. Each pump is also equipped with thermal motor protection - a built-in switch, so no additional protection needs to be purchased.