DeWalt DCK358X2T-QW Tool Kit 9Ah, 54V

54V XR FLEXVOLT 18V XR BRUSHLESS 3 PIECE KIT - 2 X 9AH

• 1X DCG414 54V XR Grinder
• 1X DCH333 54V FLEXVOLT SDS Plus Hammer Drill
• 1X DCD996 18V Hammer Drill Driver
• DCB118 Fast Charger with 8A output current
• 2X DCB547-XJ 9.0Ah Li-Ion Batteries

DCG414 54V XR Grinder
The FLEXVOLT 4-1/2 in.-6 in. (115 mm.-150 mm.) Grinder with Kickback Brake is maximized for power and durability. It delivers 13 amp power as compared to the D28144N with the portability and convenience of cordless through revolutionary FLEXVOLT technology by DEWALT.
Brake engages when trigger is released, stopping speeds of 1.5 seconds with standard grinding wheel (4-1/2 in. x 1/4 in. Bonded abrasive wheel, non-hubbed) Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off. Anti-Rotation E-CLUTCH® System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. 9,000 RPM Speed allows the use of up to 6 in. wheelsAllows for up to 6 in. wheel size for both cutting and grinding applications.

DCH333 54V FLEXVOLT SDS Plus Hammer Drill
The DCH333 gives you the cordless freedom to tackle concrete drilling and demolition work. With a 54V XR FLEXVOLT 9Ah battery, it provides 3.5J of impact energy, a no load speed of 1,000rpm, and is capable of drilling up to 66 holes per charge in concrete.

HIGH-PERFORMANCE FLEXIBLE FREEDOM
As part of the 54V XR FLEXVOLT range, the DCH333 gives you power comparable to corded rotary hammers. Drilling up to 66 holes per charge (18mm Ø x 80mm), it also has a best-in-class impact energy of 3.5J that lets you power through tough material.

THREE-MODES FOR TOTAL CONTROL
The DCH333 has a rotation stop mode for light plaster and render chiselling, an impact stop mode for wood and metal rotary drilling, and a rotary hammer drilling mode for tackling concrete.

PROTECTION WITHOUT COMPROMISE
Part of the DEWALT Perform & Protect range, the DCH333 has a category-leading low vibration level of 8.5m/s2, minimising user fatigue and long term injury from prolonged use and improving productivity.

DCD996 18V Hammer Drill Driver
The extreme runtime performance (XRP) hammer drill driver from dewalt are a high powered drill suitable for a variety of applications comfortably tackling concrete, metal and wood (when paired with the correct accessories). The DCD996 is lightweight and extremely durable with all metal chucks and the new electronic clutch for maximum control.

The DCD996 18V XRP Hammer Drill Driver is the second generation brushless hammer drill from DEWALT. The DCD996's new, highly efficient motor offers 26% more power than the DCD995. The improved motor design has increased running efficiency resulting in 43% faster speed of application and the enhanced airflow design allows the motor to run at a lower operating temperature. The DCD996's lightweight, ergonomic design, combined with the 3 variable speed settings gives you more accurate control. The DCD996 Hammer Drill also produces 19% more torque.