Festool FSK 420 Saw Guide Rail, 420mm (769942)

• The HK 55, HKC 55 and HK 85 portable circular saws can be easily connected to the cross-cutting guide rail to form a single unit, by means of a quick fastener.
• Efficient cross cuts due to quick placement on the workpiece.
• Cutting length of 670 mm makes it suitable for trimming OSB floorboards as well.
• Right-angled cross cuts with repeat accuracy thanks to precision guide.
• Retract function returns the saw to start position after sawing.
• Splinter guard for splinter-free cuts.
• Adhesive cushion strip protects the workpiece surface from being damaged.
• Slideway lining for easy movement of the machine on the trimming rails.
• Connectible cross-cutting guide rail system for angle cuts with repeat accuracy.
• Secure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide rail.
• Flexibly adjustable mitre angle.
• Locking positions make quick setting of the most important angles easier.

Runs as if lubricated
The slideway lining ensures that the machine runs along the cross-cutting guide rail.

Automatic pull-back
The retraction function brings the saw back to the starting position after sawing is complete.

Reproducible
Stop system for precisely reproducible angle cuts.

Protection and adhesion
The adhesive cushion strips keep the rail secure while simultaneously protecting the surface.

Quick-acting closure
The circular saws can be connected to or disconnected from the cross-cutting guide rail in an instant depending on whether you are sawing with guidance or freely by hand.

No splinters
The rubber lip right at the scribe mark works as a splinter guard and prevents the edges from splintering even with angled cuts.