Festool KV D8/50 Corner Connectors, 50pcs (203166)

• The clever DOMINO system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly.
• The connectors' large tightening distance and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own.
• The flush-screwed fixture elements protect each furniture component from being scratched.
• Routing and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.
• The new detachable DOMINO basic structure connectors and furniture connectors are perfectly suited for a panel thickness of 18 mm to 28 mm.
• For 50 corner joints with the DF 500.
• The DOMINO/DOMINO KV D8/50 connector is positioned both in the cupboard panel and the base of the structure with the DOMINO jointer DF 500.

With the DOMINO jointer DF 500
All joints can be produced quickly and easily with the DOMINO DF 500 joining machine.

Finished in just three steps
With only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.

It could not be easier
There is no easier way of producing a detachable corner joint. The drill template – which can be used with an extraction system – specifies the exact position of the drilled hole and the correct drilling depth, therefore guaranteeing error-free work.

Optimum strength
The split anchor provides the joint with optimum strength and ensures that the corner joint has a high level of stability.

Different material thicknesses. No problem
All material thicknesses between 18 mm and 28 mm can be machined effortlessly with the connectors.