Vivacolor Wall 4 Wall Paint

Completely matte (4), easily washable (1st class according to EN 13300) water-based paint for interior work. The paint creates a smooth, completely matte surface, masks small defects, and provides an impeccable result. The paint is awarded the Nordic eco-label and is recommended by the Latvian Asthma and Allergy Association. The product contains a minimal amount of volatile organic compounds (VOCs).

Masking small defects. Easy to apply. Easy to clean.

Consumption: 7 - 12 m²/l

Sheen: Completely matte

Application method: Airless sprayer, brush, roller

Application conditions: The surface must be clean and dry, air temperature above +5°C, relative air humidity below 80%. Avoid drafts and high temperatures during painting.

Drying time (23°C, 50% relative humidity)

You can touch after 0.50(h). Can be recoated after 2(h).

Solvent: Styrene acrylic

Surface preparation

Unpainted surfaces: Clean the surface from dust and dirt. Smooth uneven surfaces with a suitable Vivacolor series putty knife. Sand the surface and clean the sanding dust. Prime porous or unevenly absorbent surfaces, as well as fiberboard or cardboard surfaces, with water-based primer Primer 1. Prime metal surfaces (e.g. nail heads) with a suitable metal primer Universal Korrostop or other suitable anti-corrosion primer. Prime surfaces spackled with chalk putty with alkyd primer Special Primer. Follow the instructions for use when using primer. Using primer reduces paint consumption and improves adhesion between the surface and the paint. Previously painted surfaces: Remove old, peeling paint layers. Wash the surface with Special Clean detergent, rinse with water, and allow to dry. Sand glossy and hard surfaces to matte and clean the sanding dust. Prime weakly bound and dusty surfaces with alkyd primer Special Primer. Use a suitable Vivacolor series putty knife to fill cracks and holes, sand the surface, and clean the sanding dust. Prime spackled surfaces with water-based primer Primer 1.

Application

Before painting, thoroughly mix the Wall 4 paint and, if necessary, dilute with water up to 10% by volume. To achieve a uniform coverage and avoid color differences, mix the required amount of paint in one container. Apply 1-2 coats with a roller, brush, or sprayer.