Kiilto Flex Fix Universal Cement-Based Tile Adhesive 20kg

Universal, non-shrinking and flexible cement-based tile adhesive for ceramic tile installation. Long open time. Can also be used for outdoor work. C2TES1. C2ES2 with Kiilto Fixbinder

Special features

• Non-shrinking, for ceramic tile and decorative stone installation
• Can also be used for outdoor work
• C2TES1
• Curing: absorbent surfaces after 1 day, non-absorbent surfaces after 2 days
• Consumption: 2-3 kg/m²

Application

Non-shrinking cement-based adhesive for tile, clinker, lightweight concrete and moisture-resistant stone installation on vinyl, painted, tile, clinker and other surfaces, such as gypsum board treated with Kiilto waterproofing membrane or Kiilto Kosteussulku moisture insulation. Curing can be done without filling the joints with grout. Suitable for both indoor and outdoor use, but not recommended for places that are constantly submerged in water, such as pools.

The surface must be clean and free of dust. Remove water-soluble leveling compounds from the surface. Dry and absorbent surfaces should be moistened (except for tile surfaces). Underfloor heating should be turned off approximately 24 hours before tiling. When tiling vinyl, painted, old tile and clinker surfaces:

- Make sure the surface is firm
- Check the adhesion of the tiling surface to the old substrate
- Remove wax, grease and dirt with Maalarinpesu cleaning agent and rinse thoroughly.
After drying, if necessary, the surface can be sanded with sandpaper. Thoroughly clean the sanding dust.

Technical information

• Open time: > 0.5 MPa / 30 min (EN1346)
• Deformation: > 2.5 mm (EN12002)
• Working time: approximately 3-4 hours after adding water
• Max. grain size: 0.5 mm
• Slip resistance: < 0.5 mm (EN1308)
• Substrate moisture: - Concrete < 90% relative humidity
• Consumption: approximately 3 kg/m² using a standard notched trowel (notch size: 6 mm x 6 mm x 6mm) approximately 2 kg/m² using a mosaic trowel (notch size: 4 mm x 4 mm x 4 mm)
• Type of binder: resin-cement-quartz-based powder
• Mixing ratio: 5.5-6.0 L water / 20 kg bag
• Resistance to frost: Frost-resistant
• Adhesion strength: > 1.0 MPa (EN 1348)
• Certifications and registrations: C2TES1 (EN12004), M1
• Fire resistance class: E
• Storage: Unopened package in a dry place: 1 year.
• Application temperature: Optimal temperature +18-20 °C, minimum +5 °C