Kiilto XF Ready-Mixed Filler for Dry Indoor Spaces Light, 15kg

Lightweight finishing coat for walls and ceilings in dry rooms before painting and wallpapering. Especially suitable for embedding reinforcing tapes and smoothing the surface. Can be sprayed or applied manually.

Special features

• Smoothing the surface and embedding reinforcing tapes
• Provides a very smooth and white surface
• Layer thickness max. 2 mm
• Low consumption and contains lightweight fillers
• Sprayable
• Very easy to sand

Application

Kiilto XF is a sprayable ready-to-use finishing coat for walls and ceilings in dry rooms before painting and wallpapering. After drying, it creates a smooth, light and paintable surface. Before wallpapering, we recommend treating the surface with a primer paint - it will make removing the wallpaper easier. It is also suitable for embedding reinforcing tapes and smoothing joints in plasterboard sheets. Complies with the requirements of standards EN 13963:2005 and EN 15824:2009.

Technical information

• Density/specific weight: Approx. 1.0 kg/l
• Drying time: Approx. 2-3 h/mm (depending on layer thickness and ambient conditions)
• Working conditions: Recommended: +18-20 °C, minimum application temperature: +10 °C
• Bending strength: > 0.30 MPa (EN 15824)
• Substrate moisture: Concrete < 90% relative humidity
• Binder type: Polymer - lightweight filler-based finishing coat
• Frost resistance: Must not be exposed to frost
• Layer thickness: max. 2 mm
• Storage: In unopened container at a temperature exceeding +1 °C: 1 year.