VETONIT VH white 20kg filler

VETONIT VH filler Finishing filler for wet and dry rooms, as well as facades (on cement base). Moisture-resistant finishing filler for leveling walls and ceilings in wet and dry rooms, as well as facades. Available in white and gray color. Suitable for gypsum boards and all types of mineral-based water-resistant substrates, plastered or leveled with cement-based materials.

Consumption: 1.2 kg/m2 (1mm thick layer)

Positive properties:

• No need for priming the substrate (except for monolithic concrete)• Vapor-permeable, breathable• Quick and easy application

Application:

• The substrate to be treated must be stable, leveled, and free from substances that weaken adhesion: debris, dust, and oils. For leveling large unevenness (> 10 mm), use Weber lime-cement plaster, such as Weber ip 18. Moisten very dry surfaces.• Mix the dry mixture only with clean water. Do not add more water than indicated - it reduces the adhesive properties of the material. Mix for 3-5 minutes with a mixer until a workable, homogeneous mass without lumps is obtained. Then let the mixture stand for about 5 minutes and mix lightly again.• Apply Weber VH with a trowel or mechanically with a pump in a layer of 1-3 mm thickness. When applying multiple layers, make sure the previous layer is completely dry and hard. Sand the surface before applying each subsequent layer.