Magma MG-6001-5 3KW Kitchen Sink Water Mixer Chrome

Technical parameters

• Electrical network parameters: ~220 ± 10% V, 50Hz
• Power: 3000W
• Current: 13.6 A
• Minimum water pressure: 0.4 BAR
• Maximum water pressure: 5 BAR
• Maximum water heating temperature: +45˚
• Connection size to water source: ½” (internal thread)
• Safety level: IPX4

Usage

To start the water flow, move the mixer tap handle clockwise. The mixer tap has 2 independent modes - cold and hot water flow. By moving the handle slightly downwards, the mixer tap operates in the cold water mode - in this mode, you can adjust the water flow pressure by moving the handle further downwards for higher flow and upwards for lower flow. By moving the handle further downwards, the mixer tap switches to the hot water mode. In this mode, the power supply is activated, which heats the heating element located inside the mixer tap body, thus heating the water flowing through the body. The water heating temperature depends on the flow rate, as lower water flow (pressure) results in hotter water, and vice versa.

The mixer tap's heating block has a pressure transmitter built in, which disconnects the power supply when the water pressure drops below 0.4 BAR. For safety purposes, the mixer tap will not switch to the hot water flow mode if the pressure is too low or if there is no water supply.

The light indicator located on the mixer tap body shows which water flow mode the mixer tap is in - if the indicator shows a yellow light, it is in the cold water flow mode, and if it shows a red light - in the hot water flow mode.

The spout of the mixer tap rotates 360˚, ensuring convenient use of the mixer tap.