Kiilto Master Aqua Jointing Compound

Suitable for gluing construction paper to non-absorbent surfaces. Pre-treat absorbent surfaces by painting or priming with diluted glue. Also suitable for gluing PVC wall coverings and fiberglass wallpapers in wet and dry rooms.

Consumption: Approx. 4 m²/l

Instructions for use

During gluing, the room should be at normal temperature. Wait until both the wallpaper and the glue reach this temperature. When gluing the covering, also follow the manufacturer's instructions. The surface should be dry, free of dust, clean, firm, and sufficiently smooth. In wet rooms, level the walls with a moisture-resistant putty. Pre-treat very absorbent surfaces by priming with paint or glue. Use a moisture-resistant, matte primer or dilute wallpaper glue 1:1 with water for priming. When gluing plastic coverings to non-absorbent surfaces, we recommend using Kiilto M1000 ECO glue. Construction paper and fiberglass wallpapers: apply glue to the wall with a paint roller. Rub the covering against the wall to ensure adhesion and squeeze out air pockets. Lay the sheets tightly next to each other. Wait at least 24 hours before wallpapering or painting to allow the surface to dry. Plastic coverings: apply glue to the wall, for example, with a painter's roller or a spatula on such a large area that you can glue 1-3 sheets, or on the back of the sheet. Glue using the wet gluing method. Lay the sheets tightly next to each other or create a connection on the wall using a knife. Immediately wipe off fresh glue stains with a damp cloth or sponge. Clean tools in lukewarm water.