Mira 6840 Decor Decorative Filler - Microcement for Interior/Exterior, White, 15kg (5701914684007)

White finishing plaster for mineral walls both indoors and outdoors. Suitable for plastered masonry, leca blocks, brick walls and concrete surfaces. Cement based waterproof and diffusion-open dash render for structure surface of firm, homogenous cement based substrate. 

• One-component
• Can be applied in several layers
• Provides a texture surface
• Ready to use after 18-24 hours

Preperation

The substrate must be dry, clean and firm. Remove lime and cement milk residue. If necessary, the surface must be levelled and repaired with mira 6810 cemplaster or mira 5300 netfix levelling compound. Absorbent substrates must be primed with 1 part mira 4180 primer diluted in 2 parts water.

Mixing

3.8-4.4L water + 15kg mixture.

Application instructions

Application

Use a mortar mixer on low speed. Apply on the surface with a steel trowel, broom, roller or spray gun. When applying with a trowel, use the smallest amount of water allowed, when applying with a brush, broom or spray gun, use the largest amount of water allowed.

Finish

Directly after application, create the desired surface structure to the fresh mortar with a roller or a brush.