Motip Air Filter Cleaner 0.4l (090515BS&MOTIP)

Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.

• Fast-acting
• Free from solvents
• Non-corrosive
• Non-flammable

BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.

• For professional use only
• The aerosol should have room temperature
• Best processing temperature 10 to 25°C.
• Before use, shake the aerosol.
• Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer.
• Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds
• Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.