TENAPORS Neo EPS 100 (Tenax) Foamed polystyrene sheets (Gray)

Tenapors Neo EPS 100 insulation boards (grey) - Tenapors Neo foam polystyrene boards are a new technological solution for insulating building structures. Tenapors Neo foam polystyrene boards are insulation material with improved insulation properties, allowing for up to 20% reduction in insulation thickness compared to traditional white foam polystyrene. TENAPORS NEO boards are silver-grey in color because they contain graphite, which significantly increases insulation performance. Small graphite particles reflect or absorb infrared radiation, thereby reducing heat loss. Foam polystyrene products used in construction serve as an effective insulation material with versatile applications.

Complies with ETAG 004 requirements!

Free delivery for orders over 100 pieces throughout Latvia.

To effectively insulate foundations, walls, floors or roofs, EPS materials are the best choice for all types of buildings, from private houses to production, public and educational buildings. Foam polystyrene is a porous material with closed cells and flame retardant additives (substances that do not support combustion).

Main characteristics:

• The physical-mechanical properties of foam polystyrene material depend significantly on its density. Increasing the density increases the values of strength parameters: compressive strength, flexural strength, shear strength, which also determine the material's application.
• The good thermal insulation properties of foam polystyrene are due to the high content of air pores. Foam polystyrene material consists of approximately 98% air and 2% polystyrene. The effectiveness of insulation materials is characterized by the thermal conductivity coefficient "lambda" λ (W/mK), which is one of the lowest for foam polystyrene materials (especially TENAPORS NEO), thus guaranteeing minimal heat loss.
• The polystyrene that forms foam polystyrene material is not hygroscopic and, even when in direct contact with water, the material absorbs only a small amount of water! Since the cell walls are water impermeable, water can only seep through the material or enter the material through channels between the pores.
• Tenapors Neo foam polystyrene boards are resistant to ultraviolet radiation.
• Foam polystyrene insulation materials can be used for a long time at temperatures up to +80 °C.
• Foam polystyrene does not rot, does not provide food for microorganisms, and is not harmful to the environment. Foam polystyrene is resistant to weak acids, alkalis, saline water solutions, but is not resistant to solvents - aromatic and halogen-containing solvents, esters, ketones, oils, lubricants.

Application:

Boards are used as insulation material in construction for:

• Walls
• Floors
• Roofs
• Other structures

The thickness and type of boards are determined during design, according to design rules specified in building regulations or other normative documents. By using foam polystyrene boards with semi-rigid edge joints, heat loss through the joints of insulation boards is significantly reduced. For facade insulation, it is recommended to choose finishing systems that are certified according to ETAG 004 criteria.