Nocchi Drenox Submersible Water Pump

Submersible pumps DRENOX are designed for pumping drainage water. They are widely used in places where a relatively large amount of water needs to be pumped at low heights. Examples: pumping out swimming pools, preventing floods in basements, draining rainwater, operating fountains, surface water drainage. They can also be used in small water treatment plants.

Usage restrictions:
1. The temperature of the pumped water must not exceed +40°C.
2. It is forbidden to pump water with mud, sand, gravel, clay or other abrasive particles, as well as liquids containing oil products and chemically aggressive substances.
3. Not intended for watering gardens.

Installation:
1) The pump must be placed on the floor of the suction tank, or it must be hung above the sediment layer a few centimeters high from the handle.
2) The pump must be placed so that the float-type gravity valve can move freely in the vertical direction.
3) The maximum allowable submersion depth of the pump below the water level is up to 7 meters.

Adjustment of the gravity valve:
The gravity valve turns the pump on and off automatically depending on the water level. To fix it, there is a groove on the side of the pump handle. The cable of the gravity valve is placed in this groove. The length of the cable must be adjusted.