Facade filler CC 10kg

Sakret CC (Clima-Coat) fine finishing putty for facades - for smooth plastering of mineral surfaces based on white cement. The product is water and frost resistant, as well as water vapor permeable. Designed for dry and damp rooms. The finishing putty is intended for sanding.

Consumption: 1.43 kg/m2 (in a 1mm thick layer)

Application

• The surface to be treated must be clean, smooth and stable
• Mineral surfaces should be primed with SAKRET BG or SAKRET UG primer (diluted with water 1:4) before puttying with SAKRET CC
• Sandy or porous surfaces should be primed with SAKRET TGW primer before puttying
• If SAKRET CC putty is used on a surface previously coated with a film-forming paint, it must be mechanically separated from the surface and reinforced with SAKRET UG primer (diluted with water 1:3) or SAKRET TGW primer
• Mix SAKRET CC with clean water until a homogeneous mass is formed
• It is recommended to use a mixer with 600 revolutions per minute
• After the setting time (~5 minutes), mix again and apply evenly with a trowel
• SAKRET CC putty can be coated with any varnish or paint material designed for application on mineral surfaces
• Sand the plastered surface within 48 hours after application