SAKRET FK tile adhesive for stable surfaces C1 gray 25kg

Sakret Tile adhesive for rigid surfaces - adhesive for applying thin and medium thick layers on cement-based surfaces, suitable for bonding ceramic tiles and small stone mass tiles (tile size not larger than 35x35 cm). Suitable for both indoor and outdoor use. The product is water and frost resistant for both walls and floors.

Consumption: approximately 2.7 kg/m² of dry mixture, if the size of the trowel tooth is 6 mm

• for indoor and outdoor use
• frost and moisture resistant
• for walls and floors
• for stable surfaces
• on cement-based surfaces
• for bonding thin and medium thick layers
• for ceramic and stone mass tiles (not larger than 35x35 cm)
• in gray and white color
• class C1

Surface preparation:

• the surface must be firm, dry, stable and without cracks;
• clean the surface from less stable and/or detachable layers (e.g. dirt, dust, oil, paint residues, etc.);
• scrape particularly dense and/or smooth surfaces;
• prime the surface with SAKRET UG primer.

Application:

• Mix SAKRET FK in a clean container with cold water until a homogeneous mass without lumps is formed;
• it is recommended to use a mixer with 600 revolutions per minute;
• after the maturing time, approximately 3 minutes, mix again;
• Do not dilute material that has started to harden with water!
• Apply only as much mortar as can be covered with tiles in approximately 15 minutes;
• Do not fill expansion joints with adhesive!

Technical data: