Kiilto Maxirapid Special Rapid Hardening Levelling Compound for Floors (1–30 mm) 20kg

Especially fast-setting leveling compound for leveling floor surfaces, filling gaps, and creating floor slopes. Floor coverings can be laid as early as 2 hours after leveling. Can also be used for outdoor work. Low alkalinity. Cement-based.

Consumption: 1 mm layer/m², powder consumption approximately 1.6 kg (approximately 12 liters of mixture from one bag).

Advantages and features

• For fast leveling, slope formation, and floor repairs
• Suitable for outdoor work
• Surface can be walked on after approx. 45 min.
• Coverage: 2 hours
• Consumption: 1.6 kg/m²/mm

Especially fast-setting leveling compound for leveling floor surfaces, filling gaps, and creating floor slopes before forming the final layer and/or before laying the floor covering, thickness 1-30 mm. For the final layer, we recommend using Kiilto 97 DF, TopPlan DF, or Tasoflex leveling compounds. Suitable for both indoor and outdoor work. When used for outdoor work, the minimum layer thickness is 5 mm. The base must be clean and firm. Remove cement residue and paint splatters, wipe the floor thoroughly or vacuum it. Rough and uneven surfaces should be sanded before leveling. Before leveling a concrete base, prime it with diluted Kiilto Start Primer (10-20% Kiilto Start Primer primer / 80-90% water). Old surfaces and tile surfaces that need repair should be primed with undiluted Kiilto Start Primer. For outdoor work, to ensure optimal adhesion and in combination with non-absorbent bases, prime the base with Kiilto Fix Primer or use a trowel to create a bonding layer, for example, using Kiilto Saneerauslaasti cement-based adhesive. In structures supported by the ground, capillary moisture accumulation must be prevented. The base must comply with local standards. Not suitable for leveling floors that will be painted or covered with a thin coating.