Self-pickup - Ganību dambis 25D | FREE Available immediately in prof.lv warehouseSelf-pickup | Not available
Parcel terminal | Parcel terminal | Not available
Delivery by courier | from €12.99 Receive from 10. till 13. MayDelivery by courier | From 10kgDelivery by courier | Not available
Delivery by truck | from €79.99 Receive from 10. till 13. MayDelivery by truck | Not available
Delivery with manipulator | from €119.99 Receive from 10. till 13. MayDelivery with manipulator | Not available
Delivery from supplier | Delivery from supplier | Not available
CONVENIENT SHOPPING
100.000+ PRODUCTS
DELIVERY ALL OVER LATVIA
CLIENT SUPPORT
More Information
Details
Reviews
More Information
Name
Bam
Weight (kg)
25kg
Type
Grīdas izlīdzinātāji
Consumption (m2/pcs)
6.24
Thickness (mm)
3 - 40
Manufacturer
Sakret
Svītrkods
4751006560765
Details
Sakret Floor leveling compound BAMUsed for leveling or creating slopes on mineral surfaces with compressive strength ≥ 25 N/mm2 in floor coverings. Suitable for both outdoor and indoor use, including areas with high humidity (basements, garage floors, laundries, water drains); for installation of underfloor heating; leveled floors can be covered with various materials (ceramic, stone or marble tiles, PVC surfaces, parquet, linoleum, carpets).
Consumption: 1.6 kg/m2 (1mm thick layer)
Surface preparation:
The base must be dry and firm, all cracks and voids must be filled
Clean the surface from less durable and/or detachable layers
Prime absorbent surfaces with SAKRET UG primer (diluted 1:2)
Dry and highly absorbent surfaces should be primed twice!
The compound can be used on concrete and other mineral substrates
Do not use SAKRET BAM on gypsum or anhydrite substrates!
When using on heated floors, turn off the heating 5 days before and do not turn it on for 28 days after application!
Application:
Mix SAKRET BAM in a clean container with cold water until a homogeneous mass without lumps is formed
It is recommended to use a mixer with 600 revolutions per minute
After the maturing time of ~3 minutes, mix again
Do not dilute the starting mass with water, but mix again with a mixer
Pour the mass onto the surface (layer thickness ≥3mm) and level it
Do not fill expansion joints with the leveling compound
When leveling the base, an amortizing material must be embedded along the perimeter
When using the material for large-volume floor leveling, the intervals of floor expansion joints must be observed
Instructions:
The technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher temperature decreases the specified values
Protect the leveling compound during the hardening phase from sunlight, drafts, frost, and excessively high temperatures (>25°C)
Hardened compound can only be removed mechanically
Contains cement, reacts alkaline
Protect the skin and eyes, follow the technical instructions. If the product gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging
Technical data:
Maximum grain size
Strength class (LVS EN 13813)
Flexural strength class (LVS EN 13813)
Consumption
Fully loadable
Fire resistance class
Storage time
Abrasion resistance class (according to standard LVS EN 13813)