Tikkurila Lasera Wood Stain for Decorative Painting 1 L

Tikkurila, Lasera (decorative paint additive) - Water-based additive designed for adding to Tikkurila water dispersion paints before decorative painting. Lasera makes the surface translucent and extends the drying time. It can reduce the water resistance of the base color. Lasera makes decorative painting with various shades and base color combinations easier, faster, and safer. APPLICATION: Walls and ceilings for interior use. Consumption 9 - 15 m²/l, Lasera and paint mixture. Application with a roller, patterns can be created with a brush, roller, sponge, or cloth. Drying time (23°C, air relative humidity 50%) Usually dry after approximately 3 hours.

The surface to be treated must be dry, air temperature at least +5ºC, and air relative humidity below 80%.

The surface to be treated must be cleaned of dirt and dust. Previously painted surfaces should be washed with Maalipesu cleaning agent and rinsed thoroughly with water. Steel surfaces should be primed with Rostex metal primer. If necessary, the surface should be filled with a suitable Presto filler. Immediately paint with tinted Tikkurila water-based paint, such as Eko-Joker, Harmony, or Luja.

Before use, Lasera should be mixed and added to the tinted paint in a ratio of 1:1, and mixed thoroughly. Apply the translucent paint with a roller and then create patterns with a brush, roller, or cloth. Only create patterns in a 1 m² area at a time, but for larger areas, create approximately half-meter wide stripes. Additional instructions are available in Tikkurila decorative painting handbooks.

Tools should be washed with water from time to time and squeezed dry. Then, first apply a test coat, for example, on a piece of cardboard.

Tools should be washed with water. For cleaning hardened paint, it is recommended to use Tikkurila Pensselipesu tool cleaning agent.

Lasera reaches its final hardness in approximately 1 month. During this time, avoid cleaning. Clean stained surfaces with a neutral (pH 6-8) dishwashing detergent and a soft cloth. Rinse and dry the surface immediately after treatment. When preparing the dishwashing detergent, follow the manufacturer's instructions.

After treatment, handle the surface gently for a few weeks. Under normal conditions, the surface reaches its final hardness in approximately 1 month. If necessary, clean the surface with a soft brush, damp cloth, or brush.