JUTACON 150 Reinforced polyethylene film, 1.5x50m, 75m2

Armored polyethylene film - an intermediate layer with an anti-condensation layer. Used for waterproofing sloping insulated and uninsulated roofs as an anti-condensation film. The surface of the material, covered with an absorbent layer, should be facing the interior of the room. When laying the material, create 15-20 cm overlaps. Country of origin: Czech Republic.

Waterproofing films are used to protect building structures from adverse atmospheric factors - snow, rain, and condensation formation. Waterproofing films can be divided into two subgroups: simple waterproofing films and waterproofing films with an anti-condensation layer, also known as anti-condensation films. Simple waterproofing films are usually armored polyethylene films, which are laid in uninsulated roofs, well-ventilated attics, and sheds. Their main task is to collect water dripping from the roof and drain it further into the gutters. Anti-condensation films are used in sloping, ventilated roof structures as waterproofing under roofing materials with a large amount of condensation formation. They are especially recommended for metal roofs. When laying waterproofing or anti-condensation films in roof structures, it is important to ensure that there is an air gap below and above the film. These films should never be placed tightly against insulation.

TECHNICAL SPECIFICATIONS

ROLLS

Country of origin: Czech Republic