Weber (Vetonit) VR Levelling Compound 20kg

Finishing putty for dry rooms (based on polymer glue). Finishing putty for leveling walls and ceilings in dry rooms. Suitable for plasterboard panels and all types of mineral substrates, plastered or leveled with materials based on cement or plaster.

Consumption: 1.2 kg/m2 (in a 1mm thick layer)

Positive properties:

• No need for priming the substrate (except for monolithic concrete)• Vapor-permeable, breathable• Quick and easy to apply

Application:

• The substrate to be treated must be stable, leveled, and free from substances that weaken adhesion: debris, dust, and oils. For leveling large unevenness (> 10 mm), use Weber lime-cement plaster, such as Weber ip 18. Moisten very dry surfaces.• Mix the dry mixture only with clean water. Do not add more water than indicated - it reduces the adhesive properties of the material. Mix with a mixer for 3-5 minutes until a workable, homogeneous mass without lumps is obtained. Then let the mixture stand for about 5 minutes and mix lightly again.• Apply Weber VR with a putty knife or mechanically with a pump in a layer 1-3 mm thick. When applying multiple layers, make sure the previous layer is completely dry and hard. Before applying each subsequent layer, the surface should be sanded.