Self-pickup - Ganību dambis 25D | FREE Receive from 13. till 16. MaySelf-pickup | Not available
Parcel terminal | Parcel terminal | Not available
Delivery by courier | from €12.99 Receive from 15. till 21. MayDelivery by courier | From 10kgDelivery by courier | Not available
Delivery by truck | from €79.99 Receive from 15. till 21. MayDelivery by truck | Not available
Delivery with manipulator | from €119.99 Receive from 15. till 21. MayDelivery with manipulator | Not available
Delivery from supplier | Delivery from supplier | Not available
CONVENIENT SHOPPING
100.000+ PRODUCTS
DELIVERY ALL OVER LATVIA
CLIENT SUPPORT
More Information
Details
Reviews
More Information
Name
Sfp
Weight (kg)
25kg
Type
Gatavās špakteles
Application
Ārdarbiem
Manufacturer
Sakret
Svītrkods
4751006566170
Details
Sakret SFP rough facade putty - For leveling mineral surfaces and profiling facade elements in new buildings and historic buildings. Particularly suitable for finishing wall constructions with high water vapor permeability (porous, weak substrates). For interior and exterior work. Can be used in SAKRET restoration and historic plaster systems as a finishing layer. For profiling joints and other facade elements. High vapor permeability.
ApplicationSurface preparation
The substrate must be dry, firm and free of cracks. Clean the substrate from less durable and/or detachable layers, as well as from dust, dirt, oils, paint residues, etc.
Highly absorbent mineral surfaces and plasterboard should be primed with SAKRET BG primer or with water-diluted concentrated SAKRET UG primer, in a ratio of 1:3
Leaking surfaces should be primed with SAKRET TGW deep primer
Non-absorbent surfaces should be primed with SAKRET QG quartz primer
Especially dense and smooth surfaces should be treated with abrasive material
Application
For preparing the putty, mix the dry mixture in a clean container with cold water until a homogeneous mass of the required consistency is formed, without lumps. Mix again after the setting time
Apply the prepared mixture to the surface with a putty knife and spread it evenly
To achieve a smooth surface texture, smooth the applied putty using a trowel with a rubber pad (felting method)