Self-pickup - Ganību dambis 25D | FREE Available immediately in prof.lv warehouseSelf-pickup | Not available
Parcel terminal | €2.99 Receive from 21. till 23. MayParcel terminal | Not available
Delivery by courier | from €4.99 Receive from 21. till 23. MayDelivery by courier | From 10kgDelivery by courier | Not available
Delivery by truck | Delivery by truck | Not available
Delivery with manipulator | Delivery with manipulator | Not available
Delivery from supplier | Delivery from supplier | Not available
CONVENIENT SHOPPING
100.000+ PRODUCTS
DELIVERY ALL OVER LATVIA
CLIENT SUPPORT
More Information
Details
Reviews
More Information
Manufacturer
Gerband
Series
Blue Tape
Lentu tips
Vienpusējās
Reflecting vapour insulation
No
Thickness (mm)
0.33mm
Width (mm)
60mm
Length (m)
25m
Suitable
Difūzijas membrānām
Application
Ārdarbiem
Number in packages
10
Tensile strength in length (N/50mm)
100
Tensile strength in width (N/50mm)
100
Pagarinājums gareniski (%)
20
Pagarinājums šķērsām (%)
20
Svītrkods
4779019853940
Details
Special adhesive tape Gerband 587 for roof underlay membranes is designed for use on all types of known sublayer membranes with closed type and slightly rough surfaces, including outdoors. It adheres very well to wood, brick, and solid concrete surfaces. It can also be used for repair work if there are small damages or cracks in the roof underlay membranes. Application temperature from -10 °C to +40 °C
Product description:
Carrier material
Special film
Fiber protection against excessive expansion
Very elastic, even in cold weather
Stable at temperatures up to +120 °C
Resistant to UV radiation
Usage:
Sealing of sublayer membranes and facade membranes
Can be used outdoors
Connection and sealing of overhangs, joints, and diffusion maintainers or durable roof underlay membranes (categories: USB-A, USB-B, and UDB-A, UDB-B, UDB-C).
Repair of roof underlay membranes
Notes on usage:
Application temperature from -10 °C to +40 °C
Store in dry rooms, at temperatures from +5 °C to +25 °C, protected from UV radiation
Surfaces must be free of additional supports or attachments, dry, clean, without dust and grease or any other materials that repel adhesion
In case of porous surfaces, treat the surface with Butyl Primer 6000 before application
Apply the tape without stretching and press it firmly onto the surface; stronger pressure promotes better adhesion
Not suitable for bonding under mechanical stress. Before applying to plastic surfaces, perform a test, as there is a risk of plasticizer migration and corrosion due to loads. For safety reasons, check the adhesion between the adhesive tape and the membrane before use.