Geyser Nanotec Reverse Osmosis Filter Prestige Cartridge Set with Mineralization (50089)

GEIZER, one of the market leaders of household filters and water purification equipment in Russia. Thanks to the unique technologies developed by GEIZER scientists, you get purified, health-friendly water. GEIZER filters have the ability to turn water flowing through old and rusting water pipes into natural water that is still called "living" according to its properties.

Kit N1 is intended for replacing cartridges that have exhausted their resources in stationary osmosis filters manufactured by the company "GEYSER" or other 10"SL (Slim Line) standard manufacturers. They are used in regions with hard water.

1. DELIVERY SET
1. PP cartridge 1 pc.
2. BAF cartridge 1 pc.
3. CBC cartridge 1 pc.
4. Osmosis membrane 1 pc.
5. Carbon post-filter 1 pc.
6. Instructions for use 1 pc.
7. Packaging 1 pc.
Cartridges are replaced in the following order:
1. The PP cartridge is installed in the first housing.

Cleans mechanical particles from water - rust, sand and other undissolved particles larger than 5 µm.

Made of special structure foam polypropylene - the fiber density in the cartridge gradually increases from the outer surface to the inner one. As a result, the largest particles are eliminated first, then the smaller ones. Thus, a more complete use of the entire filter material is achieved. Therefore, PP cartridges are more efficient and have a greater resource than cartridges with a homogeneous porous structure.

2. The BAF 10SL Ag + cartridge is installed in the second housing.
Cartridge with multi-component ion exchange material and sorbent filling, which can be used in sink water filters for water purification.
Designed for water purification from chlorine, organic compounds, iron (up to 2mg/l) and other harmful impurities.
The cartridge consists of:
• structurally modified fibers (long fibers)
• activated silver charcoal granules
• fibrous carbon sorbent (MMB)
• ion-exchange fiber Katalons mixture, the structure of which contains silver ions and carbon microparticles.
3. The CBC cartridge is installed in the second and third housings.
CBC - a cartridge of pressed activated carbon, manufactured according to the "carbon block" technology. Made only from natural sorbent - high-quality activated carbon. Thanks to the porosity of 10 microns, the water is purified from mechanical particles. The CBC cartridge effectively removes chlorine, organic and organochlorine impurities, pesticides, petroleum products, phenol, Cryrtosporidium and Griardia bacteria. In the course of filtration, the taste, color and smell of water are qualitatively improved.

Cartridges made according to carbon-block technology have a higher sorption capacity and resistance to bacterial growth than ordinary granular carbon. The high quality and efficiency of the CBC cartridge is confirmed by the NSF certificate (issued by the most authoritative independent international organization that certifies goods and services in the field of health protection).

The membrane VNF2-1812 Vontron is installed in the membrane housing.
Designed to effectively separate various small microorganisms, hardness salts, chlorine, iron and other dissolved impurities (up to 0.0001 µm) from water. Filtration efficiency is at least 70-80%. Filtration speed 220 l/day. The filtering material consists of a roll-shaped reverse osmosis membrane.

5. Carbon post-filter ILB-GAC-1/4

Removes the aftertaste and odor of water that has been passed through the reverse osmosis membrane and stored in the water filter tank.

REPLACEMENT OF STAGE I, II, III CARTRIDGES

Close the tap in the inlet and in the storage tank. Open the clean water tap to reduce the pressure in the system. Remove the filter housing flask (1) with a wrench and replace the corresponding cartridge. Before reinstalling, coat the O-ring with food-grade silicone (not to be confused with sealant!) or petroleum jelly. Install the flask and tighten with a wrench. Check the tightness of the system.

Reverse osmosis membrane replacement

To ensure the safety of the membrane during transport and storage, it is delivered hermetically sealed. Before installation, remove the packaging, close the beacon and water supply taps, open the clean water tap and disconnect the housing connection pipes (1). Remove the old membrane (2). Install the new membrane, grease the seals with food-grade silicone or petroleum jelly (3). Screw the cover of the membrane housing. Use only recommended membranes for replacement.

Replacing the carbon post-filter

Disconnect the housing tubes (1), replace the afterfilter with a new one, connect the tubes.

Note. Do not mix up the water inlet and outlet of the afterfilter. The direction of water flow is shown by an arrow on the post-filter housing.