Reverse Osmosis Water Filter Geyser Prestige M and Prestige PM with Mineralization (50088)

The RO 2 set is intended for replacing cartridges that have exhausted their resources in stationary osmosis filters manufactured by the company "GEYSER" or other 10"SL (Slim Line) standard manufacturers. They are used in regions with hard water.
1. DELIVERY SET
1. PP cartridge 1 pc.
2. CBC cartridge 2 pcs.
3. Osmosis clinic 1 pc.
4. Carbon post-filter 1 pc.
5. Mineralizer 1 pc.
6. Instructions for use 1 pc.
7. Packaging 1 pc.
2. ORDER OF REPLACEMENT OF CARTRIDGES IN THE FILTER
Cartridges are replaced in the following order:
1. The PP cartridge is installed in the first housing.
Cleans mechanical particles from water – rust, sand and other undissolved particles larger than 5 m.
Made of special structure foam polypropylene - fiber density in the cartridge gradually increases from the outer surface to the interior. As a result, the largest particles are eliminated first, then the smaller ones. This achieves a more complete use of the entire filter material. Therefore, PP cartridges have been achieved, they have a greater resource than cartridges with a homogeneous porous structure.
Manufacturer: OOO "AKVATORIYA", Russia
2. The CBC cartridge is installed in the second and third housings.
CBC - a cartridge of pressed activated carbon, manufactured according to the "carbon block" technology. Made only from natural sorbent - high-quality activated carbon. due to 10 micron porosity, is cleaned of mechanical water particles. The CBC cartridge effectively removes chlorine, organic and organochlorine impurities, pesticides, petroleum products, phenol, Cryrtosporidium and Griardia bacteria. In the course of filtration, the taste, color and smell of water are qualitatively improved.
Cartridges made according to carbon-block technology have greater sorption capacity and resistance to bacterial growth than conventional granular carbon. The high quality and efficiency of CBC is confirmed by the NSF certificate (issued by the most authoritative independent international organization that certifies goods and services in the field of health protection).
Manufacturers: "Siam Cast Nylon Co., Ltd", Thailand
3. The membrane ULP1812-50 GPD Vontron is installed in the imaging body.
Intended to effectively separate various small microorganisms, hardness salts, chlorine, iron and other dissolved impurities from water (up to 0.0001 µm). Filtration efficiency is at least 98%. Filtration speed 200 l/day. The filtering material consists of a roll-type reverse osmosis type.
Manufacturer: SIA "Vontron", China
4. Carbon post-filter ILB-GAC-1/4
Remove the taste and odor of the water that has passed through the reverse osmosis image and stored in the water filter tank.
Manufacturer: OOO "AKVATORIYA", Russia
5. Mineralizers
For the Geyser Prestige M and PM water filter system to enrich water with magnesium and calcium necessary for the human body.
Manufacturer: OOO "AKVATORIYA", Russia
REPLACEMENT OF STAGE I, II, III CARTRIDGES
Close the tap in the inlet and in the storage tank. A clean water tap to increase the system's existing pressure. Remove the filter housing flask (1) with a wrench and replace the cartridge. Before reinstalling, coat the O-ring with food-grade silicone (not to be confused with sealant!) or petroleum jelly. Install the flask and tighten with a wrench. tightness of the entire system.
Replacement of reverse osmosis language
It is supplied hermetically sealed to ensure safety during transport and storage. Before installation, remove the packaging, close the beacon and water supply taps, open the clean water tap and disconnect the housing connection pipes (1). Remove the old adjustment (2). Install the new one, grease the seals with food-grade silicone or petroleum jelly (3). Close with the housing cap. Use only recommended languages for replacement.
Replacement of carbon post-filter and mineralizer
Disconnect the housing tubes (1), replace the afterfilter with a new one, tubes. Replacement of the mineralizer is done analogously.
Note. Do not mix up the water inlet and outlet of the afterfilter. The direction of water flow is shown by an arrow on the post-filter housing.