Tyvek Max Protect Breathable Membrane 1.5x50m, 75m2 with Increased Mechanical Strength

A diffusion membrane with exceptionally high mechanical resistance. Used in roof and wall constructions as a durable and high-quality hydro and wind insulation. An additional reinforcement layer provides even higher mechanical resistance. Recommended for roofs with a uniform board covering and situations where the membrane will remain installed without a roof covering for a longer period of time. When applying the material, the adhesive tape and inscriptions should be facing outwards. In roofs with a low slope, it is recommended to isolate nail areas with Tyvek Nail Tape. Country of origin: Luxembourg.

TECHNICAL SPECIFICATIONS
Material: HDPE and DuPont Typar (PP) blend
Weight, g/m2: 206
Water resistance (EN 1928(A)): Class W1
Fire reaction (EN 11925-2): Class E
Maximum tensile strength (MD) (EN 12311-1): 530 N/50mm
Elongation at maximum tensile strength (MD) (EN 12311-1): 15%
Maximum tensile strength (CD) (EN 12311-1): 520 N/50mm
Elongation at maximum tensile strength (CD) (EN 12311-1): 22%
Resistance to tearing MD (nail areas) (EN 12310-1): 490 N
Resistance to tearing CD (nail areas) (EN 12310-1): 480 N
Artificial aging caused by heat and UV radiation (EN 1297&EN 1296), residual values:
Water resistance (EN 1928(A)): Class W1
Maximum tensile strength (MD) (EN 12311-1): 90%
Elongation at maximum tensile strength (MD) (EN 12311-1): 90%
Maximum tensile strength (CD) (EN12311-1): 90%
Elongation at maximum tensile strength (CD) (EN 12311-1): 90%