SOUDAL Windowtape Outside 100mmx25m

Window and door joint tape for external covering. Provides water vapor diffusion from the inside to the outside. Protects joints and structures from moisture and wind.

Protection of window and door joints and structures from moisture and wind.

Joint tape for covering window and door joints from the outside.

Provides water vapor diffusion from the inside to the outside.

Protects joints and structures from moisture and wind.

The tapes have very good adhesion to all common building materials.

The tape material can be plastered and painted.

Stretchable in width and resistant to movement of wall structures.

ADHESION: Wood, Concrete, Metal, PVC, Brick, Various vapor and wind barrier membranes

USAGE

Cut the required length of the tape. Remove the protective film from the adhesive strip and stick the tape to the window frame. If the window or door is installed flush with the wall surface, leave additional space in the corners equal to the width of the tape (see drawing). If the window or door is installed on the inside of the wall surface, leave additional space in the corners equal to half the width of the tape (see drawing).

The tape is glued around the perimeter of the frame, starting from the bottom edge of the window. Proceed similarly on all sides of the window that need to be sealed. Then install the window or door frame in its place, secure it properly and fill the window joint with construction foam. Once the foam has hardened, remove any excess foam and attach the other edge of the tape to the frame/wall. Use a soft roller for optimal adhesion.

The adhesive strips on both sides of the window tape allow for installation before or after the installation of the window/door and the use of mounting foam.