Penosil Premium Construction FixFoam 878 Universal Foam Adhesive with Nozzle 750ml

Universal adhesive foam for various interior and exterior construction works. It is used all year round, guaranteeing good results at temperatures of -5... +30 0C. The adhesive foam has very good adhesive and thermal insulation properties, it has low pressure during curing and minimal further expansion. It has good adhesion to most materials such as polystyrene, plasterboard, wood, concrete, stone, metal, and PVC.

Consumption: 8-12m2 (1 can)

Areas of use: Fixing insulation panels to facades and foundations. Fixing interior finishing panels to walls. Fixing balconies. Bonding construction blocks. Reducing the impact of thermal bridges.

Instructions for use:

Surface preparation: Remove dust, particles, and grease from surfaces. To ensure the best result, moisten the dry base.

Usage temperature:

Air temperature during use: -5... -30 0C, best results at +20 0C. Can temperature during use: +5... +25C, best results at +20C. Before starting work at low temperatures, the foam can should be warmed up using water or air (max. +30C).

Usage with EasyGun applicator:

Vigorously shake the can at least 20 times. Hold the can with foam in a vertical position. Attach the EasyGun applicator to the can's valve by gently pressing it until it locks. During use, turn the can adapter downwards and press it against the EasyGun applicator with your fingers. Usage with foam gun:

Vigorously shake the can at least 20 times. Place the can with the valve facing downwards and screw it onto the gun, holding the gun handle with one hand and screwing the can with the other. During screwing, make sure there are no people on the side where the gun is located. The can should not be screwed onto the gun with the valve facing downwards or when screwing the gun onto the can. The amount of foam dispensed can be regulated with the gun's release mechanism.