Caparol EXL CT Putzgrund white XRPU primer

Caparol EXL CP Putzgrund XRPU - A water-dilutable, adhesive primer for interior and exterior use on mineral surfaces with good adhesion. Suitable for well-covering, adhesive priming coats on stable, mineral surfaces for exterior and interior work.

It is specifically used as an adhesive primer for the following artificial resin, silicone resin, dispersion-silicate, mineral plaster or colored pebble plaster coatings, which improve the application, structuring, and productivity of the plaster. Intended for use with the Capatect A + B thermal insulation system or the Capatect VHF system A+B according to table 2. page. In addition, it reduces the water absorption of the base plaster, as the base plaster prevents water from entering through defects in the structure plaster. Putzgrund 610 is also used as a decorative coating under Arte Lasur, Deco Lasur glaze techniques, as a base coating under Capadecor Putz and Calcino Decor.

Properties: weather-resistant, water-repellent, good coverage, good adhesion, water-dilutable and tintable in the Color Express system, fire reaction class "non-combustible" or "difficult to ignite" according to thermal insulation (Capatect WDV system or Capatect VHF system) construction, where it is used.

Material base: Artificial resin dispersion according to DIN 55 945.

Putzgrund 610 can be manually tinted with a maximum of 25% CaparolColor full-tone and tinting colors (formerly Alpinacolor) or AVA Amphibolin full-tone and tinting colors. Putzgrund 610 can be automatically tinted in the ColorExpress system in all traditional color tone palettes in light tones up to brightness level 70.

The substrate must be clean, dry, and free of substances that repel paint.

For suitability for different substrates and their preparation, see technical information No. 650 "Substrates and their preparation". New mineral plasters should be allowed to stand for 2-4 weeks depending on the season and temperature.