Rockwool 800 42mm 1m Pipe Insulation with Aluminum Foil

ROCKWOOL 800 stone wool shells can be used for insulation of heating and hot water pipes, as well as for insulation of cold water pipes to prevent condensation. The shell is covered with reinforced aluminum foil (with the name, diameter, and insulation thickness printed on it) with a self-adhesive edge (along the entire length of the shell). Due to the low chloride content, the risk of corrosion of steel system components is reduced. Thanks to the internal incisions, these shells are much easier to install on pipes.

Density approximately 100 kg/m3

Fire classification A2L-s1,d0

Maximum operating temperature + 250 °C

Water vapor diffusion equivalent air layer thickness > 200 m

Product marking MW-EN 14303-T9(T8 if D0<150)-st(+)250-ws1-mv2-cl10>

Thermal conductivity coefficient λD [W/mK]:

At 10oC temperature - 0.03350oC temperature - 0.037100oC temperature - 0.044150oC temperature - 0.052.