Sakret LCC mineral filler putty

Sakret LCC mineral plaster with lightweight filler - Suitable for leveling all types of mineral surfaces. Can be used for creating relief and all kinds of decorative elements, filling deep cavities and erosion damage. Single layer thickness up to 50 mm. The hardened material is easy to sand, resistant to cracking, can be painted with all types of mineral surface colors. Low volume weight, practically does not put a load on facade elements. Can be used for outdoor and indoor work, as well as in rooms with increased humidity. Available in two fractions - 0.5 mm and 1 mm.

Application

• The base must be dry, clean and durable. The temperature of the base and the surrounding environment during processing and curing should be in the range from +5°C to +25°C
• Clean the base from dust, oils, remnants of old paint and loose layers of surface material
• Prime the surface with SAKRET UG primer - diluted with water in a ratio of 1:3, or, in the case of loose surfaces, with SAKRET TGW primer
• Mix SAKRET LCC-1 or SAKRET LCC-0.5 plaster in a container with cold, clean water until a homogeneous mass without lumps is formed
• Let the mixed mass stand for 3 minutes and mix again
• Apply the obtained plaster mass to the treated surface with a metal trowel
• Do not dilute the material that has started to harden with water!
• The treated surface can be sanded after 12-24 hours, depending on the curing conditions
• Protect the treated surface from frost, direct sunlight, rainfall, and drafts during plaster curing
• Consumption. Approximately 13.5 liters of ready-to-use plaster mass can be obtained from 15 kg of dry mixture
• The minimum layer thickness for SAKRET LCC-1 is 1 mm and for SAKRET LCC-0.5 is 0.5 mm