Sakret BH Concrete - a clone with reduced water absorption

Sakret BH Concrete - a clone with reduced water absorption - Designed for the production of concrete and reinforced concrete structures in hydraulic engineering works, water drainage and sewage construction. Particularly suitable for spaces with high humidity and heavy mechanical loads. Suitable for heated floors. Excellent mechanical and climatic resistance. High water impermeability. Does not contain asbestos. High resistance in aggressive environments. Water and frost resistant. Concrete class C35.

Consumption: 80 kg/m² (if layer thickness is 40mm)

Construction

• The surface must be firm, durable and free of cracks
• Clean the surface from less durable and/or detachable layers
• Scrape particularly dense and/or smooth bases
• Observe all SAKRET BH preparation conditions, as indicated on the packaging
• Use non-absorbent or weakly absorbent formwork when pouring concrete
• In reinforced concrete structures, provide sufficient reinforcement cover
• For large horizontal structure surfaces, observe deformation joint intervals
• Treat formwork with formwork oil
• Pour and compact concrete evenly in the formwork
• Apply the clone in the required layer thickness, compact, level and smooth
• Do not fill expansion joints with concrete!
• Technical data refers to +20°C temperature and 50% relative humidity. Lower temperature increases, higher temperature decreases the specified values
• Protect the clone during the curing phase from sunlight, drafts and excessively high temperatures (>30°C)
• Protect fresh mortar from rain and excessively rapid drying
• Once the mortar has started to set, do not add water anymore!
• Immediately after working with mortar, rinse containers and tools with water
• Hardened mortar can only be removed mechanically
• Contains cement, reacts alkaline
• Protect skin and eyes, follow technical instructions. If mortar gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
• Protect the packaging from weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging

Technical data