Sakret CLP+ Lime-cement plaster - Based on lime/cement. Suitable for all types of mineral surfaces. Especially suitable for damp rooms. Suitable for plastering walls and ceilings in one or more layers. Excellent mechanical strength. Available in gray and white color. Very plastic. High hydrophobicity and water vapor permeability. Strength class - CSII.
Consumption: 15 kg/m² (if layer thickness is 10mm)
Application:
Mix SAKRET CLP+ in a clean container with cold water until a homogeneous mass without lumps is formed
It is recommended to use a mixer with 600 revolutions per minute
After the maturing time (~3 minutes), mix again
The base must be dry and firm, all cracks and voids must be filled
Clean the base from less durable and/or detachable layers
Especially dense and/or smooth bases should be treated with abrasive material
Prime highly absorbent surfaces with SAKRET BG primer or SAKRET UG primer (diluted in a ratio of 1:3)
Prime especially smooth concrete surfaces with SAKRET QG primer
Technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher temperature decreases the specified values
Protect the mortar during the hardening phase from sunlight, drafts, and excessively high temperatures (>30°C)
Protect fresh mortar from rain and excessively rapid drying
Once the mortar has started to set, do not add water anymore!
Immediately after working with the mortar, rinse the containers and tools with water
Hardened mortar can only be removed mechanically
Contains cement, reacts alkaline
Protect skin and eyes, follow technical instructions. If the mortar gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
Protect the packaging from the influence of weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging