Self-pickup - Ganību dambis 25D | FREE Available immediately in prof.lv warehouseSelf-pickup | Not available
Parcel terminal | Parcel terminal | Not available
Delivery by courier | from €10.99 Receive from 11. till 14. MayDelivery by courier | From 10kgDelivery by courier | Not available
Delivery by truck | from €79.99 Receive from 11. till 14. MayDelivery by truck | Not available
Delivery with manipulator | from €119.99 Receive from 11. till 14. MayDelivery with manipulator | Not available
Delivery from supplier | Delivery from supplier | Not available
CONVENIENT SHOPPING
100.000+ PRODUCTS
DELIVERY ALL OVER LATVIA
CLIENT SUPPORT
More Information
Details
Reviews
More Information
Type
Mūrjava
Consumption kg/m2
16.6
Blocks palette
48
Manufacturer
Sakret
Details
Sakret ZM M-10 cement-based masonry and plastering mortar - For exterior and interior work, for masonry, plastering, and repair work. Suitable for all types of wall construction with bricks or blocks (according to EN 998-2 standard, strength class M 10). Also suitable for multiple-layer plastering (according to EN 998-1 standard, mortar class CS IV). Excellent mechanical and climatic resistance. High hydrophobicity and water vapor permeability. Can be applied by hand or with a mixer. Particle size up to 2mm.
Consumption: 16.6 kg/m² (for a layer thickness of 10mm)
Application
The base must be dry and solid, all cracks and voids must be filled
Bricks or blocks must be clean and dry
Clean the base from less durable and/or detachable layers
Scrape particularly dense and/or smooth bases
Prime highly absorbent surfaces with SAKRET BG primer or SAKRET UG primer (diluted at a ratio of 1:3)
Prime particularly smooth concrete surfaces with SAKRET QG primer
Mix SAKRET ZM in a clean container with cold water until a homogeneous mass without lumps is formed
It is recommended to use a mixer with 600 revolutions per minute
After the initial setting time (~3 minutes), mix again
Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperature increases, higher temperature decreases the specified values
Protect the mortar from sunlight, drafts, and excessively high temperatures (>30°C) during the hardening phase
Protect fresh mortar from rain and excessively rapid drying
Once the mortar has started to set, do not add water anymore!
Immediately after preparing the mortar, rinse the containers and tools with water
Hardened mortar can only be removed mechanically
Contains cement, reacts alkaline
Protect skin and eyes, follow the technical instructions. If the mortar gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
Protect the packaging from the influence of weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging
Technical data
Strength class (according to standard LVS EN 998-1)
CS IV
Strength class (according to standard LVS EN 998-2)