Sakret PM Super M5 Cement-Lime Plaster and Masonry Mix

Sakret PM Super Masonry-plastering mortar - Based on lime/cement. Suitable for all types of mineral surfaces. Especially suitable for damp rooms. For masonry, plastering and repair works. Excellent mechanical strength. Gray color. High hydrophobicity and water vapor permeability. Strength class - M5.

Consumption: 16 kg/m² (if layer thickness is 10mm)

Application:

• The base must be dry and solid, all cracks and voids must be filled
• Blocks or bricks must be clean and dry
• Clean the base from less durable and/or detachable layers
• Especially dense and/or smooth bases should be treated with abrasive material
• Moisture-absorbing surfaces should be primed with SAKRET BG primer or SAKRET UG primer (diluted in a ratio of 1:3)
• Especially smooth concrete surfaces should be primed with SAKRET QG primer
• Mix SAKRET PM Super in a clean container with cold water until a homogeneous mass without lumps is formed
• It is recommended to use a mixer with 600 revolutions per minute
• After the setting time (~3 minutes), mix again
• Technical data refers to +20°C temperature and 50% relative humidity. Lower temperature increases, higher temperature decreases the specified values
• Protect the mortar during the hardening phase from sunlight, drafts, and excessively high temperatures (>30°C)
• Protect fresh mortar from rain and excessively rapid drying
• Once the mortar has started to set, do not add water anymore!
• Immediately after preparing the mortar, rinse the containers and tools with water
• Hardened mortar can only be removed mechanically
• Contains cement, reacts alkaline
• Protect skin and eyes, follow the technical instructions. If the mortar gets into the eyes, rinse with plenty of water and, if necessary, seek medical attention
• Protect the packaging from the influence of weather conditions, store on wooden pallets, in a cool and dry place, immediately cover any opened packaging

Technical data: