Sakret SBP decorative plaster 25kg

Sakret SBP / decorative plaster (milk) - Mineral-based plaster. Included in certified insulation systems SAKRET ETICS EPS and SAKRET ETICS MW. Based on white cement. Available in white color and can be tinted with mineral pigments. Milk-type, 2.0 mm and 3.0 mm fraction. Easy to apply and flexible, high water vapor permeability. For painting, we recommend using SAKRET KS G primer and SAKRET KS paint. Chemical composition: cement, construction lime, special inert additives, additives and auxiliary materials for improving processing properties.

Surface preparation:

• The substrate must be dry and firm, all cracks and voids must be filled
• Clean the substrate from less durable and/or detachable layers
• The substrate must be primed with SAKRET PG primer
• If the decorative plaster SAKRET SBP is applied on highly absorbent surfaces, it must be primed first with SAKRET TGW or SAKRET BG primer, and then with SAKRET PG primer
• If the decorative plaster SAKRET SBP is tinted, we recommend using tinted SAKRET PG primer for surface priming

Usage:

• The containers and tools used for mixing and applying SAKRET SBP must be clean and rust-free
• Mix SAKRET SBP in a clean container with cold water until a homogeneous mass is formed
• To avoid color tone differences, it is important to accurately measure the water and mix the entire content of the bag at once
• After the maturing time (~3 minutes), mix again
• Apply SAKRET SBP on the substrate with a stainless steel trowel or spatula, so that the layer thickness is equal to the size of the decorative plaster grain
• Create the decorative surface structure with circular or vertical movements (brush structure) - use a plastic trowel
• Material that has started to harden must not be diluted with water, but should be re-mixed

Technical data: